Back to the main page / Cash register equipment / Brackets

Brackets

The compact bracket for the monitor VESA (75*75, 100*100)

The monitor bracket LP-MON-MIN produced by TM LEOS is used in ergonomic racks for installing monitors with VESA 75*75 and 100*100 mounts.

Characteristics of the bracket for the monitor:

  • The bracket is equipped with a cable channel.
  • The angle of rotation of the bracket around the axis of the base rack is 360°.
  • The angle of rotation of the holder relative to the bracket is 270°.
  • The angle of inclination of the holder relative to the axis of the rack is 120°.
  • The diameter of the hole for the stand is 45 mm.
  • Production dimensions: 75×75, 100х100 mm, 200 mm, 250 mm, 300 mm.

It is used in offices, shops, warehouses and other premises.

Order

Monitor bracket VESA LP-MON-L200

Bracket for VESA monitor LP-MON-L200 TM LEOS is designed for installation of monitors with VESA standard mounting.

Features of the bracket for VESA monitor LP-MON-L200 TM LEOS:

  • the bracket is equipped with a cable channel.
  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the angle of inclination of the holder relative to the axis of the rack is 120 degrees.
  • the diameter of the hole for the rack is 45 mm.
  • production dimensions: 200 mm, 250 mm, 300 mm, 75X75, 100X100mm.

It is used in offices, shops, warehouses and other premises.

Order

Monitor bracket VESA LP-MON-L250

The monitor bracket LP-MON-L250 produced by TM LEOS is used in ergonomic racks for installing monitors with VESA 75*75 and 100*100 standard mounts.

Features of the VESA monitor bracket LP-MON-L250 TM LEOS:

  • the bracket is equipped with a cable channel.
  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the angle of inclination of the holder relative to the axis of the rack is 120 degrees.
  • the diameter of the hole for the rack is 45 mm.
  • production dimensions: 200 mm, 250 mm, 300 mm, 75х75, 100х100mm.

It is used in offices, shops, warehouse and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Monitor bracket VESA LP-MON-L300

The monitor bracket LP-MON-L300 produced by TM LEOS is used in ergonomic racks for installing monitors with VESA 75*75 and 100*100 standard mounts.

Features of the VESA monitor bracket LP-MON-L300 TM LEOS:

  • the bracket is equipped with a cable channel.
  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the angle of inclination of the holder relative to the axis of the rack is 120 degrees.
  • the diameter of the hole for the rack is 45 mm.
  • production dimensions: 200 mm, 250 mm, 300 mm, 75х75, 100х100mm.

It is used in offices, shops, warehouse and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Upper monitor bracket VESA LP-MON-TOP

The monitor bracket LP-MON-TOP produced by TM LEOS is used in ergonomic racks for installing monitors with VESA 75*75 and 100*100 mounts.

LP-MON-TOP TM LEOS upper VESA monitor bracket is intended for equipping an ergonomic stand with a monitor.

Characteristics of the bracket for the VESA monitor LP-MON-TOP:

  • mounting of the VESA standard 75*75, 100*100, 110*75.
  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the diameter of the hole for the rack is 45 mm.
  • designed for a screen diagonal from 13″ to 32″, which can be installed stationary.

It is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:

to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Hinged bracket for the monitor LP-MON-L150-150

The hinged bracket for the LP-MON-L150-150 TM LEOS monitor is used in a pair with a base rack. Also, the bracket is equipped with a cable channel

Characteristics of the hinged bracket for the LP-MON-L150-150 TM LEOS monitor:

  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the angle of inclination of the holder relative to the axis of the rack is 120 degrees.
  • the diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Hinged bracket for the monitor LP-MON-L150-200

The hinged bracket for the LP-MON-L150-200 TM LEOS monitor is used in a pair with a base rack. Also, the bracket is equipped with a cable channel

Characteristics of the hinged bracket for the LP-MON-L150-200 TM LEOS monitor:

  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the angle of inclination of the holder relative to the axis of the rack is 120 degrees.
  • the diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Hinged bracket for the monitor LP-MON-L200-200

The hinged bracket for the LP-MON-L200-200 TM LEOS monitor is used in a pair with a base rack. Also, the bracket is equipped with a cable channel

Characteristics of the hinged bracket for the LP-MON-L200-200 TM LEOS monitor:

  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • the angle of inclination of the holder relative to the axis of the rack is 120 degrees.
  • the diameter of the hole for the rack is 45 mm.

The hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Bracket for a monitor with a universal holder LP-MON-U-L200 140x25 (VESA 75*75, 100*100)

Bracket for a monitor with a universal holder LP-MON-U-L200 140×25 (VESA 75*75, 100*100) TM LEOS is placed on a rack as part of a modular system.

Characteristics:

  • designed for monitors with a diagonal of up to 25 inches.
  • the diagonal of the POS monoblock is up to 15 inches.
  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder around the vertical axis is 270 degrees.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Universal bracket LP-ARM-L100

Universal bracket LP-ARM-L100 TM LEOS:

  • It is used to attach a POS terminal or a holder for a receipt printer or a coin box.
  • It has a length L from 100 mm to 300 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Universal bracket LP-ARM-L200

Universal bracket LP-ARM-L200 TM LEOS:

  • It is used to attach a POS terminal or a holder for a receipt printer or a coin box.
  • It has a length L from 100 mm to 300 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Universal bracket LP-ARM-L250

Universal bracket LP-ARM-L250 TM LEOS:

  • It is used to attach a POS terminal or a holder for a receipt printer or a coin box.
  • It has a length L from 100 mm to 300 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Universal bracket LP-ARM-L300

Universal bracket LP-ARM-L300 TM LEOS:

  • It is used to attach a POS terminal or a holder for a receipt printer or a coin box.
  • It has a length L from 100 mm to 300 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Universal hinged bracket LP-ARM-L150-150

Universal hinged bracket LP-ARM-L150-150 used to mount a POS terminal or receipt printer holder or coin box.

Universal hinged bracket LP-ARM-L150-150

  • It has a length L from 150 mm to 200 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Universal hinged bracket LP-ARM-L150-200

Universal hinged bracket LP-ARM-L150-200 TM LEOS used to mount a POS terminal or receipt printer holder or coin box.

Universal hinged bracket LP-ARM-L150-200

  • It has a length L from 150 mm to 200 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

 

Order

Universal hinged bracket LP-ARM-L200-200

Universal hinged bracket LP-ARM-L200-200 TM LEOS used to mount a POS terminal or receipt printer holder or coin box.

Universal hinged bracket LP-ARM-L200-200

  • It has a length L from 150 mm to 200 mm.
  • Attaches to the base rack.
  • The diameter of the hole for the rack is 45 mm.

A hinged bracket is used in offices, shops, warehouses and other premises.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter.

Order

Bracket for the holder of the gun scanner LP-HOLD-HAND-SCAN-L200

  • is used to fix the scanner, which is equipped with a stand for placement on the base rack (1) together with other computing equipment
  • for mounting on a stand, you need to remove the base of the stand that comes with the scanner and fix the scanner with the holder to the hole on the bracket with a screw.
  • the bracket is installed on the base post LP-BASE (1) on the fixing ring (2), which must be fixed with a hexagon.

Technical characteristics

  • Make and model of device(s): Symbol Zebra/Motorola scanners on tripod stands
  • Offset relative to the rack axis: 200 mm
  • Range of rotation angles: 0-360°
  • Material: metal
  • Color: RAL 9005 m.sh.
  • Installation: stable base LP-BASE
  • Diameter of the hole for the rack: 45 mm
  • Cable routing: external
  • Warranty: 12 months

Complete set

  • Fixing ring: 1 pc
  • Cable channel: 1 pc
Order

Transition bracket for two racks LP-KR-DOUBLE-L410

  • intended for connecting two vertical racks at the cash register with each other, if necessary, to place a monitor between them.
  • is installed on self-service cash registers, has an upper hole intended for the upper LP-MONTOP monitor bracket (3) for fixing the monitor on it.
  • the bracket is installed simultaneously on two vertical base posts LP-BASE (1) on the fixing rings (2), which are fixed with a hexagon, after which the upper bracket for the monitor (3) is installed on the fixing ring (2).

TECHNICAL CHARACTERISTICS

  • Make and model of device(s): mounting on two base racks LP-BASE to place the monitor holder LP-MON-TOP in the middle between the racks
  • Length: 410 mm
  • Rack height adjustment: yes
  • Color: RAL 9005 m.sh.
  • The diameter of the holes for the rack: 45 mm
  • Installation: two basic LP-BASE racks
  • Warranty: 12 months

KIT

  • Fixing ring: 2 pcs
Order

Fingerprint scanner bracket LP-HOLD-HS-ZB-Teco9500

  • intended to install the ZKTeco 9500 fingerprint scanner on it
  • the bracket is installed on the base post LP BASE (1) on the fixing ring (2), which must be fixed with a hexagon.

TECHNICAL CHARACTERISTICS

  • Make and model of device(s): ZKTeco 9500 fingerprint scanners
  • Displacement relative to the axis: 150 mm
  • Mounting: lateral
  • Range of rotation angles: 0-360°
  • Material: metal
  • Color: RAL 9005 m.sh.
  • The diameter of the holes for the rack: 45 mm
  • Installation: stable base LP-BASE
  • Cable routing: external
  • Warranty: 12 months

KIT

  • Cable channel: 1 pc
  • Fixing ring: 1 pc
  • Screw: 4 pcs
Order
We are on social networks