Back to the main page / Cash register equipment / Holders

Holders

Universal PIN-PAD holder LP-PIN

Universal PIN-PAD holder LP-PIN TM LEOS is made in three sizes: 200 mm, 250 mm, 300 mm.

Characteristics:

  • Width adjustment for PIN PAD from 68 mm to 135 mm.
  • The angle of rotation of the PIN-PAD holder relative to the mounting axis is 270 degrees.
  • The angle of inclination of the holder relative to the axis is 90 degrees.
  • The cable is completed with a channel.
  • The diameter of the hole for the racks is 45 mm.
  • Color black RAL 9005 (other RAL is possible)

The PIN-PAD holder is integrated with the following equipment:

Ingenico (ICT220, ICT250, ICT350, IPP320, IPP350),Verifone (VX520, VX805, VX810, VX820), Yarus (М2100, МPED400, P2100), YOMANI, Wymix B3. Designed for installation in shops, cafes, offices, etc.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Universal Terminal holder LP-PIN(EVO)-L100

Universal Terminal holder LP-PIN(EVO)-L100 made in two sizes: 100 mm, 150 mm.

Characteristics:

  • Width adjustment for PIN PAD from 68 mm to 135 mm.
  • The angle of rotation of the PIN-PAD holder relative to the mounting axis is 270 degrees.
  • The angle of inclination of the holder relative to the axis is 90 degrees.
  • The cable is completed with a channel.
  • The diameter of the hole for the racks is 45 mm.
  • Color black RAL 9005 (other RAL is possible)

The PIN-PAD holder is integrated with the following equipment:

Ingenico (ICT220, ICT250, ICT350, IPP320, IPP350),Verifone (VX520, VX805, VX810, VX820), Yarus (М2100, МPED400, P2100), YOMANI, Wymix B3.

Designed for installation in shops, cafes, offices, etc.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Universal Terminal holder LP-PIN(EVO)-L150

Universal Terminal holder LP-PIN(EVO)-L150 made in two sizes: 100 mm, 150 mm.

Characteristics:

  • Width adjustment for PIN PAD from 68 mm to 135 mm.
  • The angle of rotation of the PIN-PAD holder relative to the mounting axis is 270 degrees.
  • The angle of inclination of the holder relative to the axis is 90 degrees.
  • The cable is completed with a channel.
  • The diameter of the hole for the racks is 45 mm.
  • Color black RAL 9005 (other RAL is possible)

The PIN-PAD holder is integrated with the following equipment:

Ingenico (ICT220, ICT250, ICT350, IPP320, IPP350),Verifone (VX520, VX805, VX810, VX820), Yarus (М2100, МPED400, P2100), YOMANI, Wymix B3.

Designed for installation in shops, cafes, offices, etc.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Universal holder for a handheld scanner LP-HOLD-SCAN-U ME

Universal holder for a handheld scanner LP-HOLD-SCAN-U ME attached to the base rack.

Characteristics:

  • The angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • Scanner type – manual.
  • Material – metal.
  • The color is black RAL 9005 (other RAL is possible).

The holder is integrated with the following equipment:

Ingenico (ICT220, ICT250, ICT350, IPP320, IPP350),Verifone (VX520, VX805, VX810, VX820), Yarus (М2100, МPED400, P2100), YOMANI, Wymix B3.

Designed for installation in shops, cafes, offices, etc.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Universal holder for a handheld scanner LP-HOLD-SCAN ME

Universal holder for a handheld scanner LP-HOLD-SCAN ME attached to the base rack.

Characteristics:

  • The angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • Scanner type – manual.
  • Material – metal.
  • The color is black RAL 9005 (other RAL is possible).

The holder is integrated with the following equipment:

Ingenico (ICT220, ICT250, ICT350, IPP320, IPP350),Verifone (VX520, VX805, VX810, VX820), Yarus (М2100, МPED400, P2100), YOMANI, Wymix B3.

Designed for installation in shops, cafes, offices, etc.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Coin holder ES-COIN-UAH

Coin holder ES-COIN-UAH is installed on the base rack LP BASE.

Characteristics:

  • the angle of rotation of the bracket around the axis of the base rack is 360 degrees.
  • the angle of rotation of the holder relative to the bracket is 270 degrees.
  • ES-COIN-UAH coin holder is designed for the Ukrainian currency – the hryvnia.

he holder is integrated with the following equipment:

Ingenico (ICT220, ICT250, ICT350, IPP320, IPP350),Verifone (VX520, VX805, VX810, VX820), Yarus (М2100, МPED400, P2100), YOMANI, Wymix B3.

Designed for installation in shops, cafes, offices, etc.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Printer holder LP-PRINT-A

Printer holder LP-PRINT-A used with base rack.

Characteristics:

  • The size of the platform for the printer is 145x170mm
  • The angle of rotation of the holder relative to the bracket is 270 degrees.
  • For printers up to 150*250 mm in size with lateral fixation.

Purpose of using ergonomic equipment:
to optimize the working space of the cashier, which will make it possible to place additional consumer goods at the service counter

Order

Scanner holder MOTOROLA/ZEBRA DS9308 vertical mounting LP-HOL-L100 TYPE 2

  • bar code scanner bracket LP-HOL-L100 Tupe 2 is designed to install the Motorola/Zebra DS 9308 scanner
  • the bracket is attached to a vertical surface or wall with 4 screws

TECHNICAL CHARACTERISTICS

  • Make and model of device(s): Motorola/Zebra DS9308 scanner
  • Offset relative to the rack axis: 100 mm
  • Range of rotation angles: 0-180°
  • Range of device rotation angles: 0-270°
  • Material: metal
  • Color: RAL 9005 m.sh.
  • Installation: vertical flat surface
  • Cable routing: external
  • Warranty: 12 months

KIT

  • Cable channel: 1 pc
Order

Currency detector holder LP-DET

  • is used with the LP-BASE base rack (1), designed to mount a currency detector on it
  • the holder is installed on the base post LP BASE (1) on the fixing ring (2), which must be fixed with a hexagon. Next, fasten the detector with screws, using the existing holes of the holder.

TECHNICAL CHARACTERISTICS

  • Make and model of device(s): LED currency detector VDS 11
  • Dimensions of the device: 120×52 mm
  • Mounting: lateral
  • Mounting holes: 2 pcs
  • Color: RAL 9005 m.sh.
  • Range of rotation angles: 0-360°
  • Diameter of the hole for the rack: 45 mm
  • Installation: stable base LP-BASE
  • Cable routing: external
  • Warranty: 12 months

KIT

  • Fixing ring: 1 pc
Order
Stands for POS equipment from LEOS pole: advantages and purpose
We are on social networks